AH5 Alarming
AH5 Alarming
Initial setup of AH5 unit to work with the XBox 360, however while training coins the unit started to alarm and wont stop even when i switch it off and back on again.
-
Administrator
- Posts: 386
- Joined: Mon Jan 15, 2007 6:38 pm
Please do some check first.
0. check if the power cable connect to small board is well connected, you can tape it to make sure.. when the customer drop coins the coin acceptor will shake and the loose connection will make the coin acceptor reset.
1. check if the Start-Set Switch is on start position when in working mode.
2. check if there is any wire tangled or block the coin drop tunnel.
3. check if all the parts is not in its position because of shipping.
4. check if there are any dirt around the coin acceptor, the alarm system build in the Coin Acceptor sometime is too sensitive
You can send the old one back for replacement if it still have problem.
When you send the faulty one back, please mark it as returned item for repairing and value under $10 in case we have to pay tax on custom.
0. check if the power cable connect to small board is well connected, you can tape it to make sure.. when the customer drop coins the coin acceptor will shake and the loose connection will make the coin acceptor reset.
1. check if the Start-Set Switch is on start position when in working mode.
2. check if there is any wire tangled or block the coin drop tunnel.
3. check if all the parts is not in its position because of shipping.
4. check if there are any dirt around the coin acceptor, the alarm system build in the Coin Acceptor sometime is too sensitive
You can send the old one back for replacement if it still have problem.
When you send the faulty one back, please mark it as returned item for repairing and value under $10 in case we have to pay tax on custom.