AH5's muiti coin acceptor AC5 reprogram manual:
2.2 Weavefuture Universal Multi Coin Acceptor AC5 Features
It include the powerful electronic micro-controller, (like a small computer system) the AC5 can automatically identify the coin by material, thickness and diameter.
Multiple coins
It designed to set 5 different output value groups at the same time; every output value set can program 10 types’ coins.
Different output values mean number of output pulse.
Setup coins by training
Programming the type of coin by training, when AC5 is in programming mode it memorize the data of material, thickness and diameter of the coins. When AC5 is in working mode it will recognize the coins by a complicated calculation and process these memorize data.
Adjustable the recognized accuracy
There is a switch in the AC5 can adjust the accurate degree of recognizing sensitive.
Alarm guard system.
The AC5 has software guard system; this guard system has alarm, which prevents opportunistic behaviors.
2.3 Specifications
Apply to coin’s diameter = 18m/m - 30m/m
Apply to coin’s thickness = 1.2m/m - 3.0m/m
Work voltage = DC12V ± 20%
Current in 50MA in power saving mode, wake up mode 500MA
Temperature =-20C~50C
Setting Switch set the AC5 to working mode (switch to start) or set the programming mode (switch to set)
Adjust Setting Switch, which for adjusting the coin’s value, can set the coin value, when the AC5 in programming mode (Setting Switch switch to set)
o When the Sensitive Switch also switch to NOM, ”00-99” means how many times of the output pulse signal will be sent when the programmed coin was deposited,. “01” means this group may output 1pulse.
Sensitive Switch when the AC5 in working mode, it is for accepting the coin’s sensitive degree, it detects the difference between real/fake coins when inserted. when AC5 in programming mode, it also help the setup the coin output value
To get the optimal effect, Please turn on power about 10 minutes before using or setting.
Connecting instructions of connector:
To get the optimal effect, Please turn on power about 10 minutes before using or setting .
Connecting instructions of connector:
Gray line――――――Coin Counter +
Red line ――DC+12V
White line――COIN Signal counter
Black line ――GND(Ground)
Gray line――――――Coin Counter -
2.4 Programming Procedure
2.4.1 Erase the previous all coin group values setting
1. Turn the Sensitive Switch to “NOM” position
2. Turn the Setting Switch to “SET” position enter programming mode, LED display “00”
3. Press and hold the Adjust Setting Switch for 5 seconds or more until hear a “BI” sound and LED will display “C”, then all the coin value setting is erased
4. Turn the Setting Switch to “START” position exit programming mode
2.4.2 Erase the previous one coin group values setting
This is only for advance user.
5. Turn the Sensitive Switch to “NOM” position
6. Turn the Setting Switch to “SET” position enter programming mode, LED display “00”
7. Press the Adjust Setting Switch to adjust the coin value in turn and let the LED display the value, which want to erase.
8. Press and hold the Adjust Setting Switch for 5 seconds or more until hear a “BI” sound and LED will display “C”, then this coin group value setting is erased
9. Turn the Setting Switch to the “START” position exit programming mode
2.4.3 Erase the previous coin value factor setting
10. Turn the Sensitive Switch to “MGN” position
11. Turn the Setting Switch to “SET” position enter programming mode, LED display “P2”
12. Press and hold the Adjust Setting Switch for 10 seconds until hear a “BI” sound and LED will display “C”, then coin value setting is erased
13. Turn the Sensitive Switch to stir to the “NOM” position
14. Turn the Setting Switch to stir to the “START” position to exit programming mode
2.4.4 Set coin group values
15. Turn the Sensitive Switch to the “NOM” position
16. Turn the Setting Switch to “SET” position enter programming mode, LED display “00”
17. Press the Adjust Setting Switch to adjust the coin value in turn and let the LED display the value, which needed, for example “01” or “02”. The value increase 1 upon 1 press. If passed the desirable value, just turn the Setting Switch to stir to “START” then turn back to “SET” again the LED will display “00”, the value can be selected again. This number stands for Coin ID in PC
18. Deposit the coins in turn, can program up to 10 coins .If less than 10 coins can add and store later. For example can prepare 10 quarters as different condition as possible. Or can deposit 10 same or different tokens.
19. Repeat above two steps to set other coin group values.
20. Turn the Setting Switch to stir to the “START” position to exit programming mode
Example A : Setup for Canadian Quarter(0.25), Loony($1.00), Toony ($2.00)
1. Clear all the settings. follow steps 4.1 and 4.3 to erase previous settings.
2. Prepare 10 Canadian Quarters, 10 Loonies, 10 Toonies.
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET changed to Programming mode, the display will show “00”
5. press Adjust Setting Switch once, LED will show “01”, drop the 10 quarters in sequence, when you drop the 10th quarter, LED will show “F” means the setting is done.( if pressed more times, for example the display show “01” or “02”, first turn the Setting Switch to START, then turn Setting Switch to SET again LED will show “00”).
6. Press Adjust Setting Switch 3 times until LED shown “04”, drop the 10 Loonies in sequence, when drop the 10th quarter, LED will show “F” means the setting is done.
7. Press Adjust Setting Switch 4 times until LED shown “08”, drop 10 Toonies in sequence, when drop the 10th quarter, LED will show “F” means the setting is done.
8. Turn Setting Switch to START, then AC5 is ready to use.
9. When drop 1 quarter, it will output one pulse signal, drop 1 Loony it will output 4 pulse signal, drop 1 Toony it will output 8 pulse signal
Example B : Setup for Canadian Nickel(0.05), Dime (0.10), Quarter(0.25), Loony($1.00), Toony ($2.00) output pulse only up to 0.25.
1. Clear all the settings. Following steps 4.1 and 4.3 to erase previous settings.
2. Prepare 10 Nickels, 10 Dimes, 10 Canadian Quarters, 10 Loonies, 10 Toonies.
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET going to Programming mode, LED will show “00”
5. press Adjust Setting Switch once, the display will show “01”, drop the 10 nickels in sequence, when drop the 10th nickel, LED will show “F” means the setting is done.( if pressed more times, for example LED show “01” or “02”, first turn the Setting Switch to START, then turn Setting Switch to SET again the display will show “00”)
6. press Adjust Setting Switch once, LED will show “02”, drop the 10 dimes in sequence, when drop the 10th dime, LED will show “F” means the setting is done
7. press Adjust Setting Switch 3 time, LED will show “05”, drop the 10 quarters in sequence, when drop the 10th quarter,LED will show “F” means the setting is done
8. Press Adjust Setting Switch 15 times until LED show “20”, drop the 10 Loonies in sequence, when drop the 10th quarter, LED will show “F” means the setting is done.
9. Press Adjust Setting Switch 20 times until LED show “40”, drop the 10 Toonies in sequence, when drop the 10th quarter, the LED will show “F” means the setting is done.
10. Turn the Sensitive switch to MGN
11. Press Adjust Setting Switch 5 times until LED show “05”
12. Turn Setting Switch to START, then AC5 is ready to use.
1. When drop 1 quarter, it will output one pulse signal, drop 1 Loony it will output 4 pulse signal, drop 1 Toony it will output 8 pulse signal, and only when drop 5 nickels = 1 dime and 3 nickels = 2 dimes and 1 nickles >= 0.25 then it will output 1 pulse signal.
Example C: Setup for US quarter output 8 pulse signal
1. Clear all the settings. Following steps 4.1 and 4.3 to erase previous settings.
2. Prepare 10 US Quarters
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET entering Programming mode, LED will show “00”
5. press Adjust Setting Switch 8 time, LED will show “08”, drop the 10 quarters in sequence, when drop the 10th quarter, LED will show “F” means the setting is done
6. Turn Setting Switch to START, then AC5 is ready to use.
7. When drop 1 quarter, it will output one pulse signal, drop 1 quarter it will output 8 pulse signals
Example D : Setup for US$ Nickel(0.05), Dime (0.10), Quarter(0.25), output 1 pulse only up to 0.25.
1. Clear all the settings. Following steps 4.1 and 4.3 to erase previous settings.
2. Prepare 10 Nickels, 10 Dimes, 10 Canadian Quarters, 10 Loonies, 10 Toonies.
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET entering Programming mode, LED will show “00”
5. press Adjust Setting Switch once, LED will show “01”, drop the 10 nickels in sequence, when drop the 10th nickel, LED will show “F” means the setting is done.( if pressed more times, for example LED show “01” or “02”, first turn the Setting Switch to START, then turn Setting Switch to SET again LED will show “00”.)
6. press Adjust Setting Switch once, LED will show “02”, drop the 10 dimes in sequence, when drop the 10th dime, LED will show “F” means the setting is done
7. press Adjust Setting Switch 3 time,LED will show “05”, drop the 10 quarters in sequence, when drop the 10th quarter, LED will show “F” means the setting is done
8. Turn the Sensitive switch to MGN
9. Press Adjust Setting Switch 5 times until the display show “05”
10. Turn Setting Switch to START, then AC5 is ready to use.
11. When drop 1 quarter, it will output one pulse signal, and only when drop 5 nickels = 1 dime and 3 nickels = 2 dimes and 1 nickels >= 0.25 then it will output 1 pulse signal.
Example E : Setup for drop 4 Quarter(0.25), output 1 pulse
1. Clear all the settings. Following steps 4.1 and 4.3 to erase previous settings.
2. Prepare 10 Quarters
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET entering Programming mode, LED will show “00”
5. press Adjust Setting Switch 1 time, LED will show “01”, drop the 10 quarters in sequence, when drop the 10th quarter, LED will show “F” means the setting is done
6. Turn the Sensitive switch to MGN
7. Press Adjust Setting Switch 4 times until the display show “04”
8. Turn Setting Switch to START, then AC5 is ready to use.
9. Only when drop 4 quarter, it will output one pulse signal,
Example F : Setup for drop US Quarter(0.25), Canadian Quarter, Canadian Loonie, Canadian Toonie, all output 1 pulse signal
1. Clear all the settings. Following steps 4.1 and 4.3 to erase previous settings.
2. Prepare 3 US Quarters, 3 Canadian Quarters, 2 Canadian Loonies, 2 Canadian Toonies
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET entering Programming mode, LED will show “00”
5. press Adjust Setting Switch 1 time, LED will show “01”, drop the all above coins in sequence, when drop the 10th coin, LED will show “F” means the setting is done
6. Turn Setting Switch to START, then AC5 is ready to use.
7. Only when drop one of any above coins, it will output one pulse signal,
Example G: Setup for Euro2, Euro1 and Euro 50
1. Clear all the settings. Following the 2.4.1 and 2.4.3 to erase previous settings.
2. Prepare 10 Euro2, 10 Euro1 and 10 Euro50cent
3. Turn the Sensitive switch to NOM
4. Turn the Setting Switch to SET going to Programming mode, LED will show “00”
5. press Adjust Setting Switch once, the display will show “01”, drop the 10 Euro50cent in sequence, when drop the 10th Euro50cent, LED will show “F” means the setting is done.( if pressed more times by mistaken, for example LED show “02” or “03”, first turn the Setting Switch to START, then turn Setting Switch to SET again the display will show “00”)
6. press Adjust Setting Switch once, LED will show “02”, drop the 10 Euro1 in sequence, when drop the 10th Euro1, LED will show “F” means the setting is done
7. press Adjust Setting Switch 3 time, LED will show “04”, drop the 10 Euro2 in sequence, when drop the 10th Euro2, LED will show “F” means the setting is done
8. Turn Setting Switch to START, then AC5 is ready to use.
9. When drop Euro50cent, it will output one pulse signal, drop Euro1 it will output 2 pulse signals, drop 1 Euro2 it will output 4 pulse signals.
10. When set the 15minutes/ per credit pulse on the Self Service Server PC then you will got Euro50cent for 15 minutes, Euro1 for 30 minutes, Euro2 for 60 minutes.
AH5's muiti coin acceptor AC5 reprogram manual.
-
- Posts: 386
- Joined: Mon Jan 15, 2007 6:38 pm